{"title":"Trending","description":"","products":[{"product_id":"plaster-quartz-primer-20kg-bucket","title":"Plaster\/quartz primer (20kg bucket)","description":"\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003cbr\u003eplaster\/quartz primer is a quartz-containing adhesion promoter, primarily used on uneven substrates for leveling and thick-layer pre-treatment in interior and exterior applications. It is also suitable as a preparation layer for subsequent coatings such as rubbed plasters, mineral finishing plasters, and similar materials. plaster primer is vapor-permeable and weather-resistant in accordance with VOB, Part C, DIN 18363 (painting and coating works).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003eUsed to improve adhesion for finishing coats made of mineral dispersion, silicate, and silicone plasters. plaster\/quartz primer reduces and equalizes the absorbency of the substrate and enhances bonding with corresponding finishing plasters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSubstrate\u003c\/strong\u003e\u003cbr\u003eThe substrate must be clean, dry, grease-free, and load-bearing.\u003cbr\u003eOld coatings that do not adhere properly must be removed.\u003cbr\u003eThe surface must be fully cured and dried.\u003cbr\u003eSandy or dusty substrates should be pre-treated with suitable primers.\u003cbr\u003eSuitable substrates include gypsum, lime, and cement-based plasters without coatings, provided they are clean and dry.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Data\u003c\/strong\u003e\u003cbr\u003eMaterial base: Polymer dispersion, pigments, quartz sand, calcium carbonate\u003cbr\u003eAppearance: White, matte\u003cbr\u003eDensity: 1.5 g\/cm³ (corrected unit)\u003cbr\u003eConsumption: approx. 150–200 g\/m² (depending on substrate)\u003cbr\u003eDrying time: minimum 12 hours (depending on ambient temperature)\u003cbr\u003eApplication temperature: Not below +5°C (material temperature)\u003cbr\u003eWater vapor diffusion: ≤ Sd value 0.2\u003cbr\u003eStorage: Cool, dry, frost-free\u003cbr\u003ePackaging: 6 kg, 15 kg, and 20 kg plastic buckets\u003cbr\u003eShelf life: max. 12 months \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Instructions\u003c\/strong\u003e\u003cbr\u003eStir plaster\/quartz primer thoroughly before application (undiluted).\u003cbr\u003eFor plasterboard, wood fiber boards, and chipboard, apply only after prior priming.\u003cbr\u003eApplication is done using a brush or lambskin roller.\u003cbr\u003eAllow a drying time of at least 12 hours.\u003cbr\u003eClean tools immediately with water after use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStorage\u003c\/strong\u003e\u003cbr\u003eStore plaster\/quartz primer in tightly closed containers in a cool, frost-free place.\u003cbr\u003eKeep opened containers tightly sealed and use promptly.\u003cbr\u003eDo not exceed a storage period of 12 months.\"\u003cbr\u003e\u003c\/p\u003e","brand":"One Stop Render Supplier","offers":[{"title":"Default Title","offer_id":57119954403660,"sku":"06004","price":54.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1033\/0626\/4908\/files\/h_1.png?v=1775475949"},{"product_id":"kam-adhesive-reinforcing-mortar-25kg","title":"muroTherm KAM adhesive \u0026 reinforcing mortar (25kg)","description":"\u003cp\u003e\u003cstrong\u003eProduct Description\u003c\/strong\u003e\u003cbr\u003eAdhesive and Reinforcing Mortar Lightweight -EPS- is a high-yield, factory-made, water-repellent, mineral dry mortar based on white cement, mortar group P II according to DIN V 18550, CS II according to DIN EN 998-1.\u003cbr\u003eLightweight Adhesive and Reinforcing Mortar -EPS- is suitable for bonding organic (e.g., polystyrene) and mineral insulation boards (e.g., mineral wool boards), as well as for embedding  reinforcing mesh onto insulation boards, especially for External Thermal Insulation Composite Systems (ETICS). Furthermore, Lightweight Adhesive and Reinforcing Mortar -EPS is suitable for reworking sound or appropriately pre-treated existing plaster, cracked plaster facades, or as a plaster bonding agent on smooth concrete surfaces, grooved and rough XPS boards (Styrodur), wood wool boards, etc., for the subsequent application of lime, lime-cement, or cement plasters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComposition\u003c\/strong\u003e\u003cbr\u003eAdhesive and Reinforcing Mortar Light -EPS- consists of:\u003cbr\u003eGraded and dried carbonate or silicate natural sands\u003cbr\u003eWhite cement\u003cbr\u003eHydrated lime\u003cbr\u003eOrganic lightweight aggregate (EPS)\u003cbr\u003eAdditives to improve workability, adhesion, and water repellency\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003cbr\u003eSuitable for:\u003cbr\u003eBonding organic insulation boards (e.g., EPS \/ Styrofoam)\u003cbr\u003eBonding mineral insulation boards (e.g., mineral wool panels)\u003cbr\u003eEmbedding reinforcement mesh on insulation boards\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAlso suitable for:\u003c\/strong\u003e\u003cbr\u003eRenovating load-bearing or pretreated old plasters\u003cbr\u003eCracked plaster façades\u003cbr\u003eActing as an adhesion bridge on:\u003cbr\u003eSmooth concrete surfaces\u003cbr\u003eRibbed or rough XPS boards (Styrodur)\u003cbr\u003eWood wool boards\u003c\/p\u003e\n\u003cp\u003eFor subsequent application of:\u003cbr\u003eLime plaster\u003cbr\u003eLime-cement plaster\u003cbr\u003eCement plaster\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTechnical Data\u003c\/strong\u003e\u003cbr\u003eWater requirement: approx. 6 L per bag\u003cbr\u003eYield: approx. 1100 L\/t\u003cbr\u003eWater absorption coefficient: w ≤ 0.5 kg\/m²h⁰·⁵\u003cbr\u003eCompressive strength: approx. 3–4 N\/mm²\u003cbr\u003eAdhesive tensile strength: \u0026gt; 0.08 N\/mm²\u003cbr\u003eWater vapor diffusion resistance (µ): ≤ 20\u003cbr\u003eThermal conductivity: approx. 0.37 W\/mK\u003cbr\u003eFire classification: A2 (non-combustible)\u003cbr\u003ePackaging: 25 kg paper bag\u003cbr\u003eStorage: Dry, protected from moisture\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSubstrate Requirements\u003c\/strong\u003e\u003cbr\u003eThe substrate must be:\u003cbr\u003eClean, dry, firm, and load-bearing\u003cbr\u003eFree from efflorescence and separating agents\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional requirements:\u003c\/strong\u003e\u003cbr\u003eTest adhesion on critical substrates\u003cbr\u003eRemove loose plaster and paint residues\u003cbr\u003eRoughen smooth-surfaced insulation boards (especially XPS) and clean them\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eApplication Instructions\u003c\/strong\u003e\u003cbr\u003eMixing\u003cbr\u003eCan be applied using plastering machines, continuous mixers, or manually\u003cbr\u003eFor manual mixing:\u003cbr\u003eMix one bag with approx. 6 L of clean water\u003cbr\u003eStir until lump-free\u003cbr\u003eAllow short maturation time, then remix\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBonding Insulation Boards\u003c\/strong\u003e\u003cbr\u003eApply adhesive using:\u003cbr\u003ePerimeter bead + dot method (Wulst-Punkt) OR\u003cbr\u003eFull-surface method (depending on system approval)\u003cbr\u003eImmediately place boards tightly and press onto substrate\u003cbr\u003eEnsure proper alignment (level and plumb)\u003cbr\u003eDo NOT apply adhesive into board joints\"\u003cbr\u003e\u003c\/p\u003e","brand":"One Stop Render Supplier","offers":[{"title":"Default Title","offer_id":57119970623820,"sku":"02250","price":11.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1033\/0626\/4908\/files\/h.webp?v=1775471605"},{"product_id":"water-resistant-tape-gipso-50mm-roll","title":"Water-resistant tape Gipso 50mm (roll)","description":"\u003cp\u003ea premium rendering tape that offers water resistance and is easy to tear. This specialist duct tape is perfect for curves and helps provide a durable, protective surface over areas that need to be kept clean. The unique adhesive ensures that no residue is left behind once the tape is peeled away, making it ideal for a wide range of surfaces. We recommend trialling the tape before applying it to any surface.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eTechnical Information\u003c\/strong\u003e\u003cbr\u003eOrange colour\u003cbr\u003e48mm x 50m\u003cbr\u003eExcellent adhesion to surfaces\u003cbr\u003eTape performance may vary depending upon the temperatures on-site. While sub-zero\/freezing temperatures could cause a lack of adhesion, extremely high temperatures may result in left-over adhesive residue.\u003cbr\u003e\u003c\/p\u003e","brand":"One Stop Render Supplier","offers":[{"title":"Default Title","offer_id":57120119456076,"sku":null,"price":6.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1033\/0626\/4908\/files\/imgi_39_45489050.png?v=1775479922"},{"product_id":"end-profile-fcp-with-mesh-12-5mm-per-piece","title":"End profile FCP with Mesh 12.5mm (per piece)","description":"","brand":"One Stop Render Supplier","offers":[{"title":"Default Title","offer_id":57137804280140,"sku":null,"price":3.79,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1033\/0626\/4908\/files\/End-profile.png?v=1775479734"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1033\/0626\/4908\/collections\/h_9.webp?v=1775644980","url":"https:\/\/onestoprender.co.uk\/collections\/popular.oembed","provider":"One Stop Render Supplies ltd","version":"1.0","type":"link"}