All products

Product Description
Adhesive and Reinforcing Mortar Lightweight -EPS- is a high-yield, factory-made, water-repellent, mineral dry mortar based on white cement, mortar group P II according to DIN V 18550, CS II according to DIN EN 998-1.
Lightweight Adhesive and Reinforcing Mortar -EPS- is suitable for bonding organic (e.g., polystyrene) and mineral insulation boards (e.g., mineral wool boards), as well as for embedding  reinforcing mesh onto insulation boards, especially for External Thermal Insulation Composite Systems (ETICS). Furthermore, Lightweight Adhesive and Reinforcing Mortar -EPS is suitable for reworking sound or appropriately pre-treated existing plaster, cracked plaster facades, or as a plaster bonding agent on smooth concrete surfaces, grooved and rough XPS boards (Styrodur), wood wool boards, etc., for the subsequent application of lime, lime-cement, or cement plasters.

Composition
Adhesive and Reinforcing Mortar Light -EPS- consists of:
Graded and dried carbonate or silicate natural sands
White cement
Hydrated lime
Organic lightweight aggregate (EPS)
Additives to improve workability, adhesion, and water repellency

Application
Suitable for:
Bonding organic insulation boards (e.g., EPS / Styrofoam)
Bonding mineral insulation boards (e.g., mineral wool panels)
Embedding reinforcement mesh on insulation boards

Also suitable for:
Renovating load-bearing or pretreated old plasters
Cracked plaster façades
Acting as an adhesion bridge on:
Smooth concrete surfaces
Ribbed or rough XPS boards (Styrodur)
Wood wool boards

For subsequent application of:
Lime plaster
Lime-cement plaster
Cement plaster

Technical Data
Water requirement: approx. 6 L per bag
Yield: approx. 1100 L/t
Water absorption coefficient: w ≤ 0.5 kg/m²h⁰·⁵
Compressive strength: approx. 3–4 N/mm²
Adhesive tensile strength: > 0.08 N/mm²
Water vapor diffusion resistance (µ): ≤ 20
Thermal conductivity: approx. 0.37 W/mK
Fire classification: A2 (non-combustible)
Packaging: 25 kg paper bag
Storage: Dry, protected from moisture

Substrate Requirements
The substrate must be:
Clean, dry, firm, and load-bearing
Free from efflorescence and separating agents

Additional requirements:
Test adhesion on critical substrates
Remove loose plaster and paint residues
Roughen smooth-surfaced insulation boards (especially XPS) and clean them

Application Instructions
Mixing
Can be applied using plastering machines, continuous mixers, or manually
For manual mixing:
Mix one bag with approx. 6 L of clean water
Stir until lump-free
Allow short maturation time, then remix

Bonding Insulation Boards
Apply adhesive using:
Perimeter bead + dot method (Wulst-Punkt) OR
Full-surface method (depending on system approval)
Immediately place boards tightly and press onto substrate
Ensure proper alignment (level and plumb)
Do NOT apply adhesive into board joints"

Product Description
plaster/quartz primer is a quartz-containing adhesion promoter, primarily used on uneven substrates for leveling and thick-layer pre-treatment in interior and exterior applications. It is also suitable as a preparation layer for subsequent coatings such as rubbed plasters, mineral finishing plasters, and similar materials. plaster primer is vapor-permeable and weather-resistant in accordance with VOB, Part C, DIN 18363 (painting and coating works).

Application
Used to improve adhesion for finishing coats made of mineral dispersion, silicate, and silicone plasters. plaster/quartz primer reduces and equalizes the absorbency of the substrate and enhances bonding with corresponding finishing plasters.

Substrate
The substrate must be clean, dry, grease-free, and load-bearing.
Old coatings that do not adhere properly must be removed.
The surface must be fully cured and dried.
Sandy or dusty substrates should be pre-treated with suitable primers.
Suitable substrates include gypsum, lime, and cement-based plasters without coatings, provided they are clean and dry.

Technical Data
Material base: Polymer dispersion, pigments, quartz sand, calcium carbonate
Appearance: White, matte
Density: 1.5 g/cm³ (corrected unit)
Consumption: approx. 150–200 g/m² (depending on substrate)
Drying time: minimum 12 hours (depending on ambient temperature)
Application temperature: Not below +5°C (material temperature)
Water vapor diffusion: ≤ Sd value 0.2
Storage: Cool, dry, frost-free
Packaging: 6 kg, 15 kg, and 20 kg plastic buckets
Shelf life: max. 12 months 

Application Instructions
Stir plaster/quartz primer thoroughly before application (undiluted).
For plasterboard, wood fiber boards, and chipboard, apply only after prior priming.
Application is done using a brush or lambskin roller.
Allow a drying time of at least 12 hours.
Clean tools immediately with water after use.

Storage
Store plaster/quartz primer in tightly closed containers in a cool, frost-free place.
Keep opened containers tightly sealed and use promptly.
Do not exceed a storage period of 12 months."

Product Description
Fiberglass mesh is fiberglass leno fabric as the substrate,the anti-emulsion polymer coating after immersion,which has good alkali resistance ,flexibility and strong tensile strength ,it can be widely used in exterior insulation finishing system(EIFS),roofing system,marble,etc.

Product Specifications
fiberglass mesh can meet your diverse project needs, guaranteeing excellent performance and cost-effectiveness, while being available in a variety of specifications, allowing you to precisely match your project, ensuring optimal performance and Meet your specific needs."

Window Protection Film is designed to protect windows from paint, damage, scratches and mortar splashed during construction and decorating work. The film ensures excellent adhesion and no residue when removed. It is also perfect for protecting glass doors, and other glass objects like tables.

Properties

Product dimensions: 600mm wide
length -  50μm / 500mm / 100m roll
Self-Adhesive - easy to apply, cut, remove
Protect from paint, dust, mess, spills
UV resistant

a premium rendering tape that offers water resistance and is easy to tear. This specialist duct tape is perfect for curves and helps provide a durable, protective surface over areas that need to be kept clean. The unique adhesive ensures that no residue is left behind once the tape is peeled away, making it ideal for a wide range of surfaces. We recommend trialling the tape before applying it to any surface.

Technical Information
Orange colour
48mm x 50m
Excellent adhesion to surfaces
Tape performance may vary depending upon the temperatures on-site. While sub-zero/freezing temperatures could cause a lack of adhesion, extremely high temperatures may result in left-over adhesive residue.

Product Description
This strong Covering Roll (Protective Film) is an essential component for surface protection during rendering, painting, and EWI (External Wall Insulation) systems. The film is designed to protect surrounding areas such as windows, doors, floors, and adjacent surfaces from dust, moisture, paint, and plaster splashes during construction work.
The covering roll ensures that finished surfaces remain clean and damage-free while work is carried out. Its flexibility allows it to adapt easily to different surfaces and shapes, while its strength ensures resistance to tearing during application and removal.
The film can also be used in areas requiring temporary protection during renovation or finishing works. It is ideal for masking large areas quickly due to its wide coverage (200 cm), reducing installation time and improving efficiency on-site.

Application
Protection during rendering and plastering work
Surface covering in EWI / ETICS systems
Masking for painting and coating applications
Protection of:
Windows and doors
Floors and tiles
фасades and insulation boards
Temporary covering for construction and renovation work

Usage Guidelines
Unroll and cut the required length from the roll
Apply directly over the surface to be protected
Secure edges using masking tape if required
Ensure full coverage of exposed areas before starting work
Remove carefully after completion of work

Key Features
Strong and tear-resistant film
Lightweight and flexible for easy handling
Water-resistant and dust-proof
Covers large areas quickly (2 m width)
Suitable for indoor and outdoor applications
Helps maintain a clean and professional work environment

Technical Specifications
Length: 50 m
Width: 200 cm (2 m)
Thickness: 50 µm (micron)
Area per roll: 100 m²
Material: LDPE (Low-Density Polyethylene)
Colour: Transparent / semi-transparent"

FOAM is a high-performance, single-component polyurethane expanding foam designed for professional use. It offers excellent thermal and acoustic insulation, strong adhesion and controlled expansion, making it ideal for sealing, filling and general construction detailing.
With a fast skin-over time and an expanded yield of up to 42 litres, this foam is perfect for efficient on-site application where speed and reliability matter.

Key Features
Expands up to 42 litres per 750ml can
Short curing time for faster installation workflows
Excellent thermal and acoustic insulation properties
Suitable for application in temperatures from +5°C to +30°C
Strong adhesion to most building substrates
Moisture-curing for reliable bonding and sealing
Designed for professional use

Typical Uses
Sealing gaps and joints around windows and doors
Filling and insulating around pipe penetrations
General construction crack and void filling
Reducing air leakage and improving thermal performance
Installing and stabilising frames and panels Application
Shake the can thoroughly before use. Attach to a suitable foam gun or adapter and apply with the can held upside down. Lightly mist the surface with water prior to application to promote curing and adhesion. Fill voids only partially, as the foam will expand during curing.
Once cured, excess foam can be trimmed using a sharp knife. Protect from UV exposure by covering or coating after installation.

Storage & Safety
Store upright in a cool, dry place
Protect from direct sunlight and heat sources
Highly flammable – keep away from ignition sources
Use appropriate PPE during application"

Product Description
Stop bead with mesh gives render and EWI systems a clean, straight edge wherever the render "stops" — at windows, doors, or junctions with another surface. It's one of the small components that has a big effect on how professional a finished elevation looks.

Key Features

• Durable uPVC profile that resists cracking and holds a straight line over time
• 100mm fibreglass mesh wing embeds fully into the basecoat, reinforcing the termination point against movement
• Controls render thickness along the edge for a consistent, even finish
• Quick and straightforward to install as part of standard render/EWI prep
• Suitable for silicone render and EWI systems
• Length: 2.5m per piece

Application: Fix along the stopping edge before basecoating, ensuring the mesh wing is fully bedded and smoothed into the render for a clean, crack-resistant termination.

Professional-grade flexible corner bead for render and plaster systems. Reinforces corners at variable angles with integrated fibreglass mesh for lasting adhesion and crack resistance.

Corner protection is one of the most critical — and most overlooked — parts of any render or plastering job. Our uPVC Flexible Corner Bead with Fibreglass Mesh delivers reliable reinforcement at both standard and irregular angles, giving you a clean, durable finish every time.

The flexible uPVC profile conforms to uneven or angled corners without kinking, making it suitable for both new builds and retrofit external wall insulation systems. The integrated fibreglass mesh wings embed firmly into the render base coat, locking the bead in place and significantly reducing the risk of cracking at stress points around openings, reveals, and corners.

Sold as a 2.5m length — ideal for individual openings, window surrounds, and door reveals without wastage.

Key Benefits:

• Flexible profile fits standard and non-standard corner angles
• Fibreglass mesh wings ensure strong mechanical bond with base coat render
• Impact-resistant uPVC resists damage during and after application
• UV and weatherproof — suitable for external use
• Clean, straight edge guide for a professional render line
• Compatible with all standard silicone, mineral, and acrylic render systems

Product Description

A ready-to-use repair filler designed for filling gaps, cracks, scratches, and holes on plasterboard and other interior surfaces. This high-performance filler is easy to sand, offers minimal shrinkage, and eliminates the need for spot priming. It ensures a smooth, consistent finish without flashing or grinning.

Key Features

• Ready-to-use formula for quick application
• Ideal for cracks, holes, gaps, and surface repairs
• Easy to sand for a smooth finish
• Minimal shrinkage
• No need for spot priming
• Won’t flash or grin after painting
• Suitable for all interior surfaces

Application

• Apply manually using appropriate tools
• Application tools: putty knife, taping knife, trowel/smoother, or airless spray machine
• Time between coats: as soon as filler is dry
• Working time: no limit
• Maximum application thickness: up to 10mm

Suitable Surfaces

Can be applied on painted or unpainted surfaces such as:

• Gypsum plaster and plasterboard
• Old painted surfaces
• Existing fillers (Toupret range)
• Cement, concrete, and cellular concrete
• Breeze blocks, bricks, and stone

Technical Details

• Code: FGRP1.5GB
• Surface Condition: Interior
• Mixing: Ready to use
• Ready to paint: 12–24 hours
• Adhesion: > 0.5 MPa
• Colour when dry: White
• Application Temperature: 8°C to 35°C
• Max Humidity: 70%
• Cleaning: Water
• Pack Size: 1.5 kg bucket

Overcoating

Compatible with Toupret fillers, conventional paints, and wall coverings.

Storage & Shelf Life

Guaranteed for 12 months from purchase when stored in original packaging, away from sunlight and frost.

Product Description

Anti-Damp Render is a breathable barrier designed to control damp on both interior and exterior masonry surfaces. Its advanced formulation allows water vapour to pass through while preventing water penetration, helping protect walls from moisture damage.

Ideal for damp-prone areas such as retaining walls, basements, cellars, and garages, this product can be applied directly onto damp, porous, and untreated masonry. Once set, it can be overcoated with breathable paint for a complete finish.

Key Features

• Breathable damp-proof barrier
• Allows vapour to escape while blocking water ingress
• Suitable for interior and exterior use
• Can be applied directly on damp and porous surfaces
• Easy application with brush, roller, or trowel
• Ideal for basements, garages, and retaining walls
• Ready to paint in 12–24 hours

Application

• Apply on clean, porous masonry (dry or damp)
• Surface must be stripped down to bare masonry before application
• Application methods: brush, roller, or trowel
• Recommended thickness: 2mm to 10mm (max 1cm)
• Time between coats: as soon as filler is dry
• Working time: 3 to 4 hours

Suitable Surfaces

• Cement and concrete
• Cellular concrete and breeze blocks
• Bricks and stone
• Interior and exterior raw masonry

Technical Details

• Code: TTHUMIB06GB
• Surface Condition: Interior / Exterior
• Mixing: Not specified
• Ready to paint: 12–24 hours
• Coverage: 1500 g/m² (at 1mm thickness)
• Adhesion: > 0.8 MPa
• IAQ Rating: A+
• Colour when dry: White
• Application Temperature: 5°C to 35°C
• Max Humidity: 80%
• Cleaning: Water
• Pack Size: 6 kg bag

Overcoating

Can be overcoated with Toupret fillers, breathable paints, or wall coatings.

Storage & Shelf Life

Guaranteed for 6 months from purchase when stored in original packaging and protected from humidity.

Product Description

A high-performance stabilising substrate hardener with exceptional penetration. It strengthens and stabilises loose or powdery surfaces, significantly improving the adhesion of fillers and coatings. Suitable for both interior and exterior applications, this colourless formula is moisture vapour permeable and can even be applied over distemper.

Key Features

• Improves adhesion of fillers and coatings
• Deep penetrating stabilising action
• Hardens loose and powdery surfaces
• Moisture vapour permeable
• Colourless finish
• Suitable for interior and exterior use
• Ready to paint in 24 hours

Application

• Ensure the surface is absorbent (porous) and completely dry
• Apply manually using a brush or roller
• Time between coats: as soon as the filler is dry
• Working time: no limit

Suitable Surfaces

Can be applied on soft, porous, and loose substrates such as:

• Gypsum plaster and plasterboards (drywall)
• Cement, concrete, mortars, bricks, and stone
• Porous tiles and renders

Technical Details

• Code: TTDUR01GB
• Surface Condition: Interior
• Task: Surface treatment
• Mixing: Ready to use
• Ready to paint: 24 hours
• Coverage: 125 g/m² (at 1mm thickness)
• IAQ Rating: A+
• Application Temperature: 5°C to 35°C
• Max Humidity: 80%
• Cleaning: Methylated spirits
• Pack Size: 1L tin

Overcoating

Compatible with all types of Toupret fillers, paints, and wall coatings.

Storage & Shelf Life

Guaranteed for 12 months from purchase when stored in original packaging, away from sunlight and frost.

Safety Instructions

• Ensure proper ventilation during use
• Do not smoke or use near open flames
• Do not apply under polyurethane or epoxy solvent-based paints
• Always follow technical and safety guidelines

Warning: Hazardous product. Follow all safety precautions and refer to the technical data sheet before use.

This is a ready-mixed renovation skimcoat designed for levelling and finishing damaged, uneven, or textured surfaces. It’s more advanced than a standard finish filler because it can handle rough substrates and still deliver a smooth final surface.

 Key Features:

• Ready to Use – no mixing required
• Covers Textured & Rough Surfaces – ideal for renovation work
• Up to ~5mm Depth – thicker than typical skim coats
• No PVA / No Spot Priming Needed – saves prep time
• Easy to Sand – smooth finish ready for paint
• Certified for Plasterboard Jointing

 Application:

Best suited for:

• Renovation projects (old walls, damaged plaster)
• Covering textured surfaces (like artex or rough finishes)
• Levelling uneven walls before painting
• Full wall skim coating

 Product Details:

• Type: Ready-mixed skimcoat / levelling filler
• Usage: Interior
• Depth: Up to ~5mm
• Drying: Approx. 12+ hours (paint-ready)
• Pack Size: 10kg

 How It Fits in Workflow:

Used when surface is not smooth enough for finish filler

1. Surface prep (if needed)
2. Renovation Skimcoat (this product)
3. Sand smooth
4. Optional: Finish filler (for ultra-fine finish)
5. Paint

This is a paper jointing tape used for reinforcing plasterboard joints when applying jointing compounds. Unlike mesh scrim, this is a traditional high-strength tape used in professional drywall finishing.

 Key Features:

• Strong Paper Construction – high tensile strength for joints
• Pre-Creased Center Line – easy folding for internal corners
• Smooth Finish – ideal for seamless jointing
• Professional Grade – preferred for crack-free results
• Compatible with Joint Compounds

 Application:

Best used for:

• Plasterboard / drywall jointing
• Internal corners (thanks to center crease)
• Seam reinforcement before skimming
• Professional finishing systems

 Product Details:

• Type: Paper joint tape
• Width: 50mm
• Length: 150m
• Usage: Interior (drywall systems)

 How It Fits in Workflow:

1. Apply joint compound
2. Embed Joint Tape (this product)
3. Apply additional compound layers
4. Sand → Finish / Paint

This is a surface treatment product, not a filler. It acts as a moisture barrier to block damp before applying fillers, plaster, or paint.

 Key Features:

• Moisture Barrier – blocks localized damp and humidity
• Prevents Damp Damage – protects walls before finishing
• Covers Micro-Cracks – seals minor surface imperfections
• Ready to Use – no mixing required
• Easy Application – brush or roller

 Application:

Ideal for:

• Damp walls (interior problem areas)
• Bathrooms, kitchens, basements
• Walls with moisture patches before painting
• Preparation before filler or skim coat application

 Product Details:

• Type: Anti-damp coating / surface treatment
• Usage: Interior (mainly damp-prone areas)
• Finish: Barrier layer (paintable after drying)
• Pack Size: ~1kg (ready mixed)

 How It Fits in Workflow:

1. Anti-Damp Treatment (this product)
2. Filler / repair (if needed)
3. Skim / finish
4. Paint

Toupret Adhesive Scrim is a self-adhesive fiberglass mesh tape designed for reinforcing plasterboard joints and preventing cracks. It’s typically used alongside jointing compounds to create strong, durable seams in drywall systems.

 Key Features:

• Self-Adhesive: No need for additional glue or compound before application
• High Strength Mesh: Reinforces joints and prevents cracking
• Works in Cold Conditions: Reliable adhesion even at low temperatures
• Wide Temperature Range: Performs between 5°C – 35°C
• Super Strong Hold: Ensures long-lasting joint stability

 Application:

• Ideal for:
  • Plasterboard / drywall jointing
  • Crack reinforcement before filling
  • Seam strengthening in wall systems
  • Repair work before applying filler or skim coat

 Product Details:

• Type: Self-adhesive fiberglass mesh tape
• Size: 90m x 48mm
• Usage: Interior (primarily)
• Origin: Made in EU

 How It’s Used:

1. Apply tape directly over the joint or crack
2. Press firmly to ensure adhesion
3. Apply joint compound or filler over the tape
4. Smooth and sand after drying

Toupret Fill-Flex is a highly flexible ready-mixed filler designed for repairing gaps and cracks on surfaces that are subject to movement. Its advanced fibrous formulation ensures long-lasting repairs without cracking.

 Key Features:

• Highly Flexible: Moves with the substrate to prevent cracking
• Fibrous Reinforcement (Fibacryl Technology): Adds strength and durability
• Excellent Adhesion: Bonds to plaster, masonry, primed wood & painted surfaces
• No Cracking or Shrinkage: Maintains integrity over time
• No Need to Spot Prime: Saves time in finishing
• Up to 1 cm Depth: Suitable for deeper gap filling

 Application:

• Ideal for:
  • Cracks and gaps in walls & ceilings
  • Joints subject to movement
  • Interior and exterior repairs
  • Multi-surface applications (plaster, wood, paintwork)

 Product Details:

• Type: Ready-mixed flexible filler
• Technology: Fibrous (Fibacryl)
• Color: White
• Net Weight: 1 kg
• Usage: Interior & Exterior

 Ideal For:

• Areas prone to movement or vibration
• Long-lasting crack repairs
• Professional and DIY use where flexibility is critical

Toupret Airless Jointing Plaster is a high-performance spray-applied plaster designed for fast and efficient jointing and skimming. Engineered for use with airless spray machines, it delivers a smooth, professional finish with minimal effort, making it ideal for large-scale projects.

 Key Features:

• Airless Spray Application: Optimized for machine use, ensuring fast coverage
• Fine Finish: Provides a smooth, high-quality surface ready for decoration
• Easy to Sand: Simplifies finishing and touch-ups
• Smooth Glide Application: Ensures even spreading during use
• Certified for Jointing: Meets UKCA & CE standards
• High Productivity: Ideal for large areas and professional use

 Application:

• Designed for:
  • Plasterboard jointing
  • Full surface skimming
• Suitable for use with airless spray machines

 Product Details:

• Type: Ready-mixed plaster
• Color: White
• Net Weight: 25 kg
• Application Method: Spray (airless machine)
• Finish: Fine, smooth surface

 Ideal For:

• Large-scale construction projects
• Professional plastering contractors
• Fast and efficient wall finishing